SkullandBonesSkateboards.com Forum Index » MANUFACTURERS FORUM » Deck measurements |
Page 1 of 1 |
|
Author |
Message |
tioem |
Posted: Tue Dec 28, 2004 7:18 pm |
|
|
Joined: 05 Feb 2004
Posts: 5478
Location: Pleasant Hill, CA
|
I have some questions about board measurements.
Wheelbase:
Is this from the inside bolts (not the ones on the tail/nose side) of one truck to the inside bolts of another?
Width:
Do you measure the widest point of the board?
Nose/tail:
Where do you measure from? The bolts near the nose/tail, or from the mid-point of the base plate?
Thanks for you help,
tom |
_________________ Anger is passing.
When you pass, I'll be less angry.
http://tomledin.com |
|
Back to top |
|
|
theshralpster |
Posted: Tue Dec 28, 2004 8:08 pm |
|
|
Joined: 24 Apr 2004
Posts: 3273
|
Inside of hte inner bolts.
Widest point.
And my guess would be from the outer bolts to the very end of the board. |
|
|
Back to top |
|
ThrashCan |
Posted: Tue Dec 28, 2004 8:18 pm |
|
|
Joined: 16 Mar 2004
Posts: 1331
|
Inner bolts
Widest point
Nose to tail, end to end, tip to tail.....following the shape of the board, not str8 across. |
|
|
Back to top |
|
|
skinny |
Posted: Wed Dec 29, 2004 12:50 am |
|
|
Joined: 12 Sep 2004
Posts: 2706
|
Wheelbase is from bolt to bolt on the inside of the deck most decks these days are 14 in. Widest point for me is usually right across the front truck bolts. Tail and nose are from the outer bolts on the wheelbase to the tip of nose or tail. For new school bolts you add 1/4 in to the actual length of the tail...if some deck should have a 6in tail then it would be 6 1/4 in from the bolts to the tip (new school bolts). |
|
|
Back to top |
|
tioem |
Posted: Wed Dec 29, 2004 10:28 am |
|
|
Joined: 05 Feb 2004
Posts: 5478
Location: Pleasant Hill, CA
|
Thank you gentlemen! |
_________________ Anger is passing.
When you pass, I'll be less angry.
http://tomledin.com |
|
Back to top |
|
|